Dyno Nobel announced successful results of a trial taking place at a surface molybdenum mine in the United States. The mine agreed to an initial three-month trial using Dyno Nobel’s Differential Energy technology. The goal was to improve safety, particularly through NOx reduction, along with improving blast performance with fragmentation, oversize and hard toes. By switching to Differential Energy, the mine met the goals they set for themselves, which resulted in lowering their overall production costs.
| Figure 1: Examples of the different density variations that were used at the mine during the trial. |
To help address the problems the mine was having, Dyno Nobel employed its Titan 1000 technology. Prior to the trial, the mine was loading dry holes with a 30:70 mixture (30% emulsion and 70% ANFO) and wet holes with 100% gassed emulsion.
The Differential Energy system allows blasters to accurately vary the density of chemically gassed emulsion as it is being loaded into the blasthole, enabling the operator to load multiple densities of gassed emulsion into the same hole and match the geology characteristics of the ground.
 |
| Figure 2: Results of detonation velocity measurements for one of the blasts. |
The mine had the challenge of blasting through a variety of different geologies from very hard rock to softer rock. Due to this, the blast crew loaded very high densities in the hard rock and much lower densities in the softer rock to maximize the efficiency of the blast.
The figures (right) illustrate the different density variations and the measured results of detonation velocity (VOD) from one of the blasts.
The trial period was extended from three months to six months, during which more than 109 trial blasts were conducted to adequately measure air quality, mine productivity, fragmentation and digability. The mine was able to meet the goals set forth at the beginning of the trial:
• Safety — Differential Energy proved to be a reliable and resilient product that provided dependable results where no undetonated blasting agent was found in the muck piles.
• Air Quality — The number and severity of NOx incidents were significantly reduced. This allowed the mine to consider revising its air quality permit to allow for larger blast events.
• Productivity — Switching to Differential Energy allowed the mine to go from using two bulk trucks to a single truck that can load both wet and dry holes. The Differential Energy truck provided a faster turnaround time and a larger capacity allowing for more holes to be loaded per cycle.
• Fragmentation and Digability — Oversized and floor grade problems were noticeably reduced. There were no physical measurements of fragmentation, but drill and blast managers and shovel operators observed a noticeable improvement in dig times.
Since the trial, which took place more than one year ago, the mine has fully adopted Differential Energy technology, using 100% Titan 1000 and no longer uses ANFO. The technology enabled the mine to redistribute the explosive energy in the blast hole, distributing the accurate amount of energy throughout the hole, varying the detonation pressure. This process reduced NOx, improved fragmentation, oversize and hard toes, and increased productivity while reducing overall costs.
