The composite shell material used in the HR185 rollers is up to 70% lighter than the shell used on traditional steel rollers and up to 40% lighter than other plastic shell materials on the market. This significantly lower weight enables safer, easier handling and helps reduce the risk of injuries that can occur while installing new rollers or replacing failed rollers during maintenance. In addition, should a roller reach the end of its service life and stop rotating, there is no steel end cap to damage the belt, reducing the risk of belt damage.
The HR185s are also ideal for noise-sensitive applications, including export terminals and conveying installations near populated areas. They generate more than 50% less noise than traditional steel rollers. The natural dampening effect of the composite means the rollers minimize noise impact on the surrounding environment.
“In addition to improving safety and increasing productivity, these composite rollers can reduce total cost of ownership by up to 20%”, said Chris Mitchell, global product line manager for Sandvik Mining. They require less time and manpower to install and maintain, and their reduced power demand due to a lower rotating inertia means savings in electricity costs. A large, non-rotating end cap covers up to 90% of the roller face and helps to limit damage to seals and bearings from dirt, rocks and other material buildup at the roller face, further extending the roller life and reducing costs.”
The 185 composite conveyor rollers feature a composite tube and molded composite end caps, which hold the bearings and seals. Unlike other plastic rollers that rely on the physical properties of a single primary shell material to deliver both strength and abrasion resistance, the shells of Sandvik HR185 rollers are formed by advanced processes to deliver a two-part composite tube that can handle all the running loads of a steel roller at a significantly reduced weight.
Despite their light weight, the new Sandvik HR185 composite rollers deliver durability in demanding medium- to heavy-duty conveying applications. Suitable for high speeds and large tonnages, the rollers are available in diameters from 152 mm to 178 mm, with bearing sizes from 6306 up to 6310. www.sandvik.com